Jensen Spinning Wheels

The Jensen Tina II IN STOCK!

The most popular Jensen, this 18" double treadle wheel with finials (1/2 spokes) and ball bearings comes with 3 bobbins that will hold 6-8 ounces of yarn. Distaff included may be placed on right or left side. Brass orifice is 3/8". Ratios: 7.8, 8.5, 9, 10, 11 and 12 to 1. Bobbins (including extra high speed bobbins) and whorls can be stored on the wheel. Price includes shipping within the continental US.
Mr. Jensen is talking of retiring soon so if you want one of his wheels, do not wait too long!

High speed kit (3 bobbins and 2 whorls): will give ratios of 13,14,16 and 18 to 1

JEN-3001 - $235 includes shipping

Ultra high-speed whorl: will give ratios of 22 and 24 to 1

JEN-1002 - $44

Finishing: we can finish the wheel for you. We will apply two coats of hi-quality tung oil to the wood and use steel wool after each coat. Will take about 2 weeks.

JEN-3000 - $250

The Jensen Debbie Gossip

similar to the Tina II with same ratios and options but with 2 flyers. Great for teaching. Comes with 2 bobbins only.

The Jensen Ultimate Production Wheel

is a 30" diameter double treadle wheel. Ratios are 10, 12, 13.3, 15 and 17 to 1.
Includes shipping within the continental US. Finials (1/2 spokes) as pictured right are $250 extra.
The plain version is shown below.

High speed kit (3 bobbins and 2 whorls): will give ratios of 18.7, 23, 24 and 27 to 1

JEN-3001 - $235 includes shipping

Ultra high-speed whorl: will give ratios of 30 and 40 to 1

JEN-1002 - $44

Slow speed whorl: ratio of 7.5 to 1

JEN-1001 - $44

Finishing: we can finish the wheel for you. We will apply two coats of hi-quality tung oil to the wood and use steel wool after each coat. Will take about 2 weeks.

JEN-3002 - $300

Finials

JEN-4000 - $250

The Jensen Production Wheel

this is a smaller version of the Ultimate. It is a 24" double treadle wheel which comes with 3 bobbins and a distaff. Ratios are 8.7, 9.6, 10.6, 12 and 13.7 to 1. Orifice is 3/8".
Includes shipping within the continental US. Finials (1/2 spokes) as pictured above are $250 extra.

High speed kit (3 bobbins and 2 whorls): will give ratios of 15,18.4, 19 and 21.8 to 1

JEN-3001 - $235 includes shipping

Ultra high-speed whorl: will give ratios of 24 and 32 to 1

JEN-1002 - $44

Slow speed whorl: ratio of 6 to 1

JEN-1001 - $44

Finishing: we can finish the wheel for you. We will apply two coats of hi-quality tung oil to the wood and use steel wool after each coat. Will take about 2 weeks.

JEN-3002 - $300

Finials

JEN-4000 - $250

Flyer on the right - No charge; specify when ordering the wheel.

Jensen Bobbins

JEN-3300 - $44

Jensen hi- speed bobbins

JEN-3301 - $44

Extra drive band material (not spliced)

JEN-1063 - $9.50

JEN-3006 - $112

4-bobbin Lazy Kate
(Price does not include bobbins)

JEN-3007 - $139

Replacement Brake tension peg

JEN-1020 - $17